Installation Guide
Solecis AVB-DA-RGBHV-ST-0102
Overview
AVB-DA-RGBHV-ST-0102 Specifications (Cont.)
The Solecis AVB-DA-RGBHV-ST-0102 1x2 RGBHV HD-15, Stereo Distribution
Amplifier (FG1340-1101-02) is a high resolution wideband PC Splitter with
exceptional characteristics and features second to none. With an RGB video
bandwidth in excess of 350Mhz (-3dB) the AVB-DA-RGBHV-ST-0102 is the
perfect choice for all presentation applications.
Sync Output
Level:
TTL
Gain:
TTL restore
75 ohm
Impedance:
The buffered input provides for a local monitor loop through and main output for
onward connection to monitors, projectors and plasma displays. The main output
features 75 ohm drive for connection to long cable runs and TTL Sync restore for
total compatibility.
Audio:
Balanced/Unbalanced audio via 3.5mm stereo socket to
phoenix
Power
Input Voltage:
9V
The AVB-DA-RGBHV-ST-0102 is capable of providing either balanced or
unbalanced audio outputs.
Connector:
2.1mm DC power jack for use with included external
power supply.
Activity LED
Power Consumption:
Dimensions (HWD):
Weight:
3W
green = signal source present
red = unit powered but not
connected to RGBHV source
1.49” x 5.70” x 3.85” (38cm x 14.5cm x 9.8cm)
1.5 lbs. (0.68kg)
Audio IN
(front)
Video IN
Monitor IN
Certifications:
• CE
• UL
• FCC class B, part 15
• RoHS/WEEE compliant
Safety Instructions
Please read these instructions before using your AMX Solecis device. Failure to
comply with these instructions could result in fire, electrical shock, personal injury,
death, or damage to the equipment.
Liquid Spills
Do not set drinks on top of the unit or immerse the unit in liquid.
Do Not Disassemble
This device contains no user serviceable parts. All servicing must be performed by a
qualified service technician.
For Safety Reasons
•
•
•
•
Do not place the unit on an unstable surface.
Do not use near water or sources of heat.
Use only recommended attachments.
Use the type of power supply as specified.
Unplug the power to the unit and refer servicing to qualified personnel under the
following conditions:
If liquid has been spilled or the unit has been exposed to rain or water.
If it does not operate normally when the operating instructions are followed or if it
exhibits a distinct change in performance indicating a need for service.
If the unit has been dropped or the cabinet damaged.
(rear)
Video OUT
Audio OUT
•
•
FIG. 1 Solecis AVB-DA-RGBHV-ST-0102
Product Specifications
•
Connections
AVB-DA-RGBHV-ST-0102 Specifications
Connect the RGBHV and Audio sources to the Input sockets on the front panel
RGB Input
of the unit.
Number:
Connector:
Level:
1
•
•
The RGB inputs are 75 ohm terminated and the audio input 47Kohm termi-
nated. The video outputs are fully 75 ohm driven and the audio balanced.
For unbalanced systems use the + and Gnd terminals.
HD-15
Analog
1V p-p
75 ohm
Note: It is imperative that the input sources are fully compatible with the display
and sound devices.
Max Level:
Impedance:
Sync Input
Type:
The unit may now be powered.
Power / Video Indication (“Active” LED)
Analogue or TTL
470 ohm
•
When the unit is powered without the RGBHV input connected, the Active
Impedance:
RGB Video Bandwidth:
RGB Return Loss:
Sync Processing:
RGB Output
Number:
indicator will be Red.
•
When a signal source is applied, the indicator will turn Green.
300MHz -3dB
-45dB@10MHz, -27dB@100MHz
None
2
Connectors:
Level:
HD-15
Analog
Unity
75 ohm
Gain:
Impedance:
|